So, after some playing around trying to figure out a preferred physical layout, I decided a Hillside 46 splayed keyboard would be about right. Thanks to Leo at Beekeeb for answering all my questions before ordering and during the build! Surface mount soldering was tricky, but everything works on the first try! I finally can use...
Well, I had intended to have my pinkies rest on the outside of the board for a traditional keyboard feel, but I screwed up and my indexes are now on the inner columns.
You also don’t have a real feel for spread or stagger until you put it all together.
I tried regular key caps but they’re too big, and if you’re looking for a modified key layout most key cap sets are saddled and curved.
So, that being said, low profile switches and key caps is the way to go. It also helps to know the difference between mx, kahli, and gateron keys
I teased Mantis v0.3 with two previous posts. I finally finished building it over the weekend and updated the QMK firmware including RGB Matrix support. I’ve been typing on it all day and it’s a joy to use. The layout and keymap are mostly the same as what I had on v0.2 before....
Are you ready for the new one? (lemmy.world)
The pain of realising you got your PCB wrong, and need to use two pins earmarked for the LCD for the TX & RX to allow the sides to communicate :-( (lemmy.world)
First keyboard build! (slrpnk.net)
So, after some playing around trying to figure out a preferred physical layout, I decided a Hillside 46 splayed keyboard would be about right. Thanks to Leo at Beekeeb for answering all my questions before ordering and during the build! Surface mount soldering was tricky, but everything works on the first try! I finally can use...
First full keyboard (lemmy.world)
Learned a lot, not completely satisfied with the turnout, but I’ll have more ammo for the next build....
Mantis v0.3 hatched (lemmy.world)
I teased Mantis v0.3 with two previous posts. I finally finished building it over the weekend and updated the QMK firmware including RGB Matrix support. I’ve been typing on it all day and it’s a joy to use. The layout and keymap are mostly the same as what I had on v0.2 before....