I’ve done this before with hot swappable boards plenty of times, no problem. If the leg appears to actually be damaged, don’t use it, but if you can bend it back and if seems solid, send it!
Don’t use previously-soldered switches in a hotswap, but otherwise it should be fine to unbend them. I use Outemu switches a lot and it just is what it is. They’re cheap, so the metal is thin and the packaging is minimal, but I really like some of them, like the dustproof green.
One thing to note is that hot-swaps were not really invented with an eye towards frequent switch changes, and can get pulled off the PCB with rough or constant changes, particularly when putting them in, or the internal contacts can get bent (lumps of old solder on switch legs are particularly bad for this). If it’s a pricy keyboard, I’d recommend installing switches with the PCB out of the board so you can support the socket from behind.
I have Outemu switches, and I haven’t had problems bending pins back. And as someone who majored in metalsmithing in college, as long as it’s not obviously cracked or loose-feeling before you install, you shouldn’t have to worry about it breaking inside the keyboard.
Just try to keep the corrective adjustment to a minimum (i.e. don’t go back and forth), and you shouldn’t have to worry about work-hardening the pin to the point of breaking.
Use a set of flat-jawed pliers, if you have them, try not to crush the pin, and you should be fine. If you do decide to order a full set, iirc they often come with a few extra switches to cover any bad ones.
Just be careful not to bend them past the point where theyre vertical enough to go in the socket. Its not very difficult to get right buy you could definitively break one if you push it too far. Just use a soft touch and you should be fine.
Dragons of Eden Ethereal Runes will close in 24 hours! jellykey.com/…/dragons-of-eden-ethereal-runes/Act quickly to join and not miss out on the opportunity to own these unique art pieces.
I think github.com/KMKfw/kmk_firmware might be what you are looking for: It exposes itself as flash drive in bootloader-mode and the files on there are just regular Python scripts. If you search for “KMK macro pad”, you’ll find a bunch of projects - most of them diy. If you want to start from scratch, Jan Lunge created an awesome tool for setup and keymap adjustments (video www.youtube.com/watch?v=RtYJYFMWjNM, repo github.com/JanLunge/pog) - with the idea being that after setup you do not need the tool anymore to adjust the keymap.
I mean, I don’t know how comfortable I’d be bringing one to work, but the behavior you’re looking for (complex macros with swappable config files) remind me of pentesting devices like the Rubber Ducky.
You may want to check out vortex keyboards. They don’t have macro pads only keyboards though. You do get 3 layers to reprogram any key, no software needed. I know all their older keyboards like the core, cypher, pok3r are all programmable, not sure about the newer ones.
I don’t think there is any commercially available macropad that allows remapping without compiling. A custom macro with a controller that runs MicroPython though, like the Raspberry Pi Micro, can be modified by changing the source code, so no extra software needs to be installed. See this as an example blog.4dcu.be/diy/2021/04/05/Macropad.html
This might work for you, the Pimoroni Keybow. The older version uses a text file to configure it, this new version seems more advanced but might still be a fit for what you’re after.
No - however you could look for macro boards that have VIA firmware, as most of those can be configured using Chrome browser (WebHID), unless your org has an enterprise policy that interferes with that? The config software runs in Chrome as a website - so worth checking if the VIA keyboard web app is accessible on your work machine before purchasing a macro pad.
VIA firmware stores the config in the keyboard’s internal eeprom AFAIK, so you should be able to setup your macros from another computer or android phone and still use them when connected to your work machine - unlike other software like Logitech Options where the config is deleted from the peripheral after a connection interruption…
Does your employer have a policy allowing you to request software to be installed on your machine, especially if it’s needed for work? I had Logitech Options installed on my first day with no hassle from IT. Your situation sounds a lot like an unfortunate case of possibly power tripping IT admins doing more harm than good
My employer does have a process for requesting software, but it’s a very large company and requires that it go through a whole vetting process and security audits before having it added to the approved software list. I’m already applying some pressure to have some more important software added and am trying not to burn up all the good will I may have 😅.
I am actually able to connect to the VIA web app, but I don’t have any compatible devices currently. It’s very possible though that we may have some software or policy that will block it when I attempt to do so though (it’s not unusual to be able to connect to a website and do certain things only to have specific actions trigger some piece of our security suite). Knowing what the average user is like I can’t really fault them for it, but it is annoying.
All that said, would you have a recommendation for the cheapest VIA pad on Aliexpress that I could buy to test with?
That’s my worst case, but I’d rather not as there are times when I’d like to change the macros during work and I won’t be bringing a personal computer with me to work to do so.
If you’re allowed to have flash media, KMK as mentioned elsewhere just lives on the microcontroller as a python script, and the keymap is very human readable. I have made everything from a 4x3 macropad to a 102-key compact 1800 with it.
If it’s a government type place, I can say that I can access the VIA site and connect to and update my keyboard. However, having a keyboard that allows a text file to be saved on it would probably be against policy, so I’m not sure that would even be a good workaround.
Yes, I use vim :) The spacebar is basically split into four buttons. The rightmost one is actually space. The leftmost one is shift. This means I only need one shift key as I don’t need to alternate left and right shift. The keys with arrows on them are not actually arrow keys, I use arrow keys on a layer. The left one pointing right is enter when pressed and FN when held. the right one is is -_ when pressed and a layer key when held. All the the mods on the left work like that too: tab when pressed, mouse layer when held. 0 when pressed, superkey when held. Esc when pressed, ctrl when held.
mechanicalkeyboards
Hot
This magazine is from a federated server and may be incomplete. Browse more on the original instance.